Products >> Micro Pump >> Micro Gear Pump

Food Grade Fructose Machine High Precision Filling Micro Gear Pump

Food Grade Fructose Machine High Precision Filling Micro Gear Pump

Product No.：202311817452
Online Inquiry

Food Grade Fructose Machine High Precision Filling Micro Gear Pump

This micro gear pump is a small displacement external gear pump. The housing is precision machined from 304 stainless steel, the gear is made from PEEK, and the dynamic seal at the shaft end is made of fluororubber skeleton shaft seal.

Features

. The model is small in size and compact in structure.

. PEEK gears and bushings are resistant to organic solvents, corrosion resistance, and high strength and friction resistance.

. High pressure and large flow rate

. The flow rate is fixed and cannot be adjusted.

. Intermittent work, no continuous work

. The brushed motor can work for about 5,000 hours, and the normal service life is 2-3 years.

. Safety and environmental protection levels can meet international standards (CCC, ROSH, CE)

Technical Parameters

	Description
Model	ORIS1GE2DCT51-24-40W
Displacement	2ml/rev
Flow	1800ml/min
Pressure	5bar
Motor	Brushed DC motor
Speed	3000rpm
Power	40W
Voltage	24V
Current	1.6A
In and out direction	Both sides of the pump body
In and out thread	G1/8
Temperature resistance range	-10-50℃
Noise	80dB
Material	Pump body 304, sealing ring PTFE, gear PEEK
Service life	5000-8000H
Viscosity range	0-3000cps

Installation Dimensions

Application

Fructose machines, packaging machines, filling machines, wok food processing, processing and cleaning, etc.

Precautions

1. It is strictly prohibited to transport or clean solvents and materials containing dichloromethane, tetrahydrofuran, butyllithium, and dimethylacetamide.

2. Before disassembling the pump, please cut off the power supply to the motor and completely release the pressure in the pump.

3. Do not change the components of the pump and motor. Any changes may reduce the pressure rating of the pump and cause harm to people.

4. A sealing ring, sealant or raw material tape must be placed on the inlet and outlet joints of the pump, especially at the inlet. If there is air leakage, the liquid will not be sucked, and the noise will even increase.

5. It is prohibited to transport media containing particles, and it is prohibited to run idling/dry.

OEM service is available upon your request.

Hot Pinch Valve Products:

12VDC 3way Pinch Valve 02T | 12VDC NC Pinch Valve 05T | 24VDC NO Pinch Valve 05T

You may also be interested in:

WK Series Pinch Valve | Rotary Dispensing Valve | Solenoid Isolation Valves